International Journal of System Signal Control and Engineering Application
ISSN: OnlineISSN: Print 1997-5422
Abstract
Development of multi-layer Printed Circuit Board (PCB) by using Eagle has been presented in this project. The Eagle is a CAD tool comprises of Schematic Module, Layout Editor Module, Autorouter Module and CAM Job. The schematic module is for development schematic. After designing the schematic, Electrical Rule Check (ERC) would be performed for electrical errors and consistency check between schematic and board. Thereafter, with the help of this schematic, it needs to create a board in the Layout Editor Module. Then the Digital Rule Check (DRC) has to be operated for reporting any errors in the Board like clearance errors under the set of design rules. Thereafter, 100% finished multi-layer (1-16) board would be created by Autorouter with desired track size and layer. Afterwards, adding ground and mounting holes manufacturing data have to be generated by CAM Job and send the board house for fabrication. Finally, the board house provides multi-layer finished Printed Circuit Boards (PCBs). After fabrication, the board should be assembled and tested successfully. The testing data would be presented for functionality characteristics.
How to cite this article:
M.N. Islam, M.S. Alam and M.A.S. Haque. Development of Eagle Multi-Layer Printed Circuit Board with CAD and CAM.
DOI: https://doi.org/10.36478/ijssceapp.2021.77.80
URL: https://www.makhillpublications.co/view-article/1997-5422/ijssceapp.2021.77.80