Journal of Engineering and Applied Sciences
ISSN: Online 1818-7803ISSN: Print 1816-949x
Abstract
The success or failure of composite formation is determined by the properties of a material that predominate deformation during the process. Wrinkling is caused by out-of-plane deformation due to compressive loading in the plane of the material during the forming process. Consequently, capturing the out-of-plane properties using a suitable experimental method is required with the ultimate aim of predicting and optimizing forming processes. A comparison between two test methods to characterize the bending behavior of woven fabric prepreg was presented. Results show that the vertical cantilever test offers a good control of the deflection shape and reproducible results. On the contrary, the sample twisting was observed during the horizontal test as the sample is bent under its own weight.
How to cite this article:
Hassan Alshahrani and Mehdi Hojjati. Comparison of Horizontal and Vertical Cantilever Tests for the
Characterization of Bending Behavior in Woven Fabric Prepregs.
DOI: https://doi.org/10.36478/jeasci.2017.4344.4348
URL: https://www.makhillpublications.co/view-article/1816-949x/jeasci.2017.4344.4348