Research Journal of Applied Sciences
ISSN: Online 1993-6079ISSN: Print 1815-932x
Abstract
This study proposes a new approach of unified power quality conditioner which is made up of a matrix converter without energy storage devices to mitigate the current harmonics, voltage sags and swell. By connecting the matrix converter output terminals to the load side through series transformer and the input side of matrix converter is connected to the supply side with step up transformer. So, a matrix converter injects the compensation voltage on the load-side, so it is possible to mitigate the voltage sag/swell problems, resulting in an efficient solution for mitigating voltage and current related power quality problems. Thus, the proposed topology can mitigate the voltage fluctuations and current harmonics without energy storage elements and the total harmonic distortion produced by the system also very low. It also reduced volume and cost, reduced capacitor power losses, together with higher reliability. The Space-Vector Modulation (SVM) is used to control the matrix converter. Matlab/Simulink based simulation results are presented to validate the approach.
How to cite this article:
G.L. Valsala and L. Padma Suresh. Matrix Converter Based Unified Power Quality Conditioner (MUPQC) for Power Quality Improvement in a Utility.
DOI: https://doi.org/10.36478/rjasci.2014.174.180
URL: https://www.makhillpublications.co/view-article/1815-932x/rjasci.2014.174.180