TY  - JOUR
T1  - Development of Technologies for Cooling Strips of Steel 60C2XA on a
Retractable Roller Conveyor
AU - Zhauyt, Algazy AU - Kyrykbaev, Batyrkhan AU - Agimov, Talgat AU - Kozbagarov, Rustem AU - Chigambaev, Timur AU - Abilkaiyr, Zhastalap 
JO  - Journal of Engineering and Applied Sciences
VL  - 14
IS  - 16
SP  - 5840
EP  - 5846
PY  - 2019
DA  - 2001/08/19
SN  - 1816-949x
DO  - jeasci.2019.5840.5846
UR  - https://makhillpublications.co/view-article.php?doi=jeasci.2019.5840.5846
KW  - effective ways
KW  -longitudinal-wedge mill
KW  -temperature-deformation
KW  -hot-rolled
KW  -austenitization
KW  -Cold-rolled
AB  - These days, ensuring the high quality of thin products (0.6-2.0 mm) is the most promising direction
for the development of hot-rolled strip production. Hot-rolled strips can be used in place of a more expensive
cold-rolled strip. In the production of ultra-thin cold-rolled strips, the use of thin hot-rolled strips as a rolling
stock allows to significantly reduce the cost of the latter (at least 20%). However, the replacement of cold-rolled
strips with hot-rolled ones is possible only in the case when hot-rolled steel will completely satisfy a number
of technological requirements, i.e. have a satisfactory microstructure and the required level of mechanical
properties, etc. An effective tool for influencing the formation of the structure and properties of steel is targeted
hot rolling sheets on a suitable mill in combination with controlled cooling. Therefore, the use of reserves to
improve the quality of sheets by improving the design of the mill and the temperature-deformation modes of
rolling becomes one of the most important tasks facing producers of rolled metal. It is known that hot
deformation of austenite with controlled temperature-deformation mode and subsequent cooling of rolled
products is one of the most effective ways to improve the properties of rolled products.
ER  -