TY  - JOUR
T1  - Behaviour of Precast Interior Joint Using a Notch Connection under Cyclic Loading
AU - , Masdiana AU - Parung, Herman AU - Tjaronge, M.W. AU - Djamaluddin, Rudy 
JO  - Journal of Engineering and Applied Sciences
VL  - 14
IS  - 5
SP  - 1636
EP  - 1644
PY  - 2019
DA  - 2001/08/19
SN  - 1816-949x
DO  - jeasci.2019.1636.1644
UR  - https://makhillpublications.co/view-article.php?doi=jeasci.2019.1636.1644
KW  - Joint
KW  -precast
KW  -notch connection
KW  -cyclic
KW  -ECCS
KW  -hinge area
AB  - The research has aimed behaviour of precast interior joint. The research consists of analyze crack
patterns, hysteresis loop characteristics, ductility and strength of precast joint. The speciment consists
of 2 precast interior joints using a notch models known as BTK-30 and 40 and 1 monolith interior joint known
as BN. The beams were connected in area where plastic hinges. The dimension of speciments were
200×300×1.500 mm and column 300×300×1.500 mm. The length of notch were 150 mm which connected by
welding system and grouting system. The load was a lateral loading as cyclic loading. The method of analysis
using European Convention for Constructional Steelwork (ECCS) 1986 standard. The results are all cracks were
flexural cracks where in the plastic hinge area. The hysteresis loop characteristics shows a curves identical to
joint monolith. The comparison of two precast joint that BTK-40 is the best value on cracking, strength and
ductility.
ER  -