TY  - JOUR
T1  - Mechanism of Glucose Insulin Control in Type 1 Diabetes Using Harr Wavelet Method
AU - Arangasamy, R. AU - Sundararajan, J. AU - Shankar, G. AU - Hariharan, G. 
JO  - Journal of Engineering and Applied Sciences
VL  - 8
IS  - 5
SP  - 146
EP  - 155
PY  - 2013
DA  - 2001/08/19
SN  - 1816-949x
DO  - jeasci.2013.146.155
UR  - https://makhillpublications.co/view-article.php?doi=jeasci.2013.146.155
KW  - Blood glucose
KW  -insulin
KW  -glucose tolerance test
KW  -pre-diabetes
KW  -controller section
KW  -pumping method
KW  -Haar wavelet
AB  - The main aim of this study is to inject insulin for type 1 
  diabetes using pumping of insulin. The blood glucose level has to be monitored 
  with the help of glucose tolerance test. For efficient method to control type 
  1 diabetes researcher will use embedded linear parameter varying methodology 
  controller. In this study, there are three things researchers need to focus. 
  The first is the sensor values read from the sensors has to be monitored and 
  the second is the lab information (patient’s 
  basic level of tests). Depending on the patients test details, the insulin has 
  to be injected. For example, if the person sensor value is greater than the 
  reference limit then he has to be provided with insulin for a longer period. 
  So, the comparison of lab details with the patients current sensor values play 
  a vital role in determining the insulin level for a patient. Finally, the feedback 
  has to be obtained with the help of those comparisons and it has to be sent 
  once again as a loop to the controller for later comparison and also for database 
  information. Here, the controller is the key element for updating all the information 
  about the patient and it will control all the parameters of the board. Here, 
  researchers will use EEPROM for saving all the data on a location basis. It 
  is capable of holding 256 bytes at a time and each location can store one byte 
  information at a time.
ER  -