TY  - JOUR
T1  - Justification of the Process of Extruding a Combustion, Improving the Design of the Extruder
AU - Kushnir, V. AU - Gavrilov, N. AU - Kim, S. AU - Shkotova, T. 
JO  - Research Journal of Applied Sciences
VL  - 16
IS  - 1
SP  - 1
EP  - 8
PY  - 2021
DA  - 2001/08/19
SN  - 1815-932x
DO  - rjasci.2021.1.8
UR  - https://makhillpublications.co/view-article.php?doi=rjasci.2021.1.8
KW  - Extrusion technologies
KW  -extrusion process
KW  -extruder
KW  -screw surface
KW  -hydraulic shutter
KW  -processing of field crop waste
KW  -technical solution for improving the extruder design and increasing the extruder’s productivity
AB  - A theoretical calculation of the process of
processing feed by creating a hydraulic shutter using the
physical and mechanical properties of the material (the
angle of pinching the material) is carried out. Theoretical
problems of the fundamentals of material deformation are
considered. A scheme is proposed for calculating the
acting forces when creating a hydraulic shutter. In this
case, the structural changes of the extruder screw are
achieved by making the bevel angle of the screw extruder
surface (View A). Theoretical analysis of the dependence
of the torque on the viscosity of the feed, on the angle of
the slope of the surface of the screw, analysis of the
dependence of the power and capacity of the extruder on
the speed of the screw and on the angle of the slope of the
screw surface, on the viscosity of the feed.
ER  -