@article{MAKHILLJEAS2019141618215,
    title = {Development of Technologies for Cooling Strips of Steel 60C2XA on a
Retractable Roller Conveyor},
    journal = {Journal of Engineering and Applied Sciences},
    volume = {14},
    number = {16},
    pages = {5840-5846},
    year = {2019},
    issn = {1816-949x},
    doi = {jeasci.2019.5840.5846},
    url = {https://makhillpublications.co/view-article.php?issn=1816-949x&doi=jeasci.2019.5840.5846},
    author = {Algazy,Batyrkhan,Talgat,Rustem,Timur and},
    keywords = {effective ways,longitudinal-wedge mill,temperature-deformation,hot-rolled,austenitization,Cold-rolled},
    abstract = {These days, ensuring the high quality of thin products (0.6-2.0 mm) is the most promising direction
for the development of hot-rolled strip production. Hot-rolled strips can be used in place of a more expensive
cold-rolled strip. In the production of ultra-thin cold-rolled strips, the use of thin hot-rolled strips as a rolling
stock allows to significantly reduce the cost of the latter (at least 20%). However, the replacement of cold-rolled
strips with hot-rolled ones is possible only in the case when hot-rolled steel will completely satisfy a number
of technological requirements, i.e. have a satisfactory microstructure and the required level of mechanical
properties, etc. An effective tool for influencing the formation of the structure and properties of steel is targeted
hot rolling sheets on a suitable mill in combination with controlled cooling. Therefore, the use of reserves to
improve the quality of sheets by improving the design of the mill and the temperature-deformation modes of
rolling becomes one of the most important tasks facing producers of rolled metal. It is known that hot
deformation of austenite with controlled temperature-deformation mode and subsequent cooling of rolled
products is one of the most effective ways to improve the properties of rolled products.}
    }