@article{MAKHILLJEAS2018131816815,
    title = {Interference and Signal Quality Analysis of Cellular Wireless Network},
    journal = {Journal of Engineering and Applied Sciences},
    volume = {13},
    number = {18},
    pages = {7677-7682},
    year = {2018},
    issn = {1816-949x},
    doi = {jeasci.2018.7677.7682},
    url = {https://makhillpublications.co/view-article.php?issn=1816-949x&doi=jeasci.2018.7677.7682},
    author = {Dalal Kanaan,Seham and},
    keywords = {Break point distance,signal to interference ratio,radio propagation,carrier frequency,network performance,quality of the system},
    abstract = {The frequency reuse technique that is used to face the insufficiency of bandwidth available for
cellular service operators to extend the network capacity. Although, cells use the same channels are physically
separated by a reused distance, the problem of interference in the same channel that affect the system
performance will be created. In this research, the simulation results are supported to study the impact of
increasing carrier frequency for reduce cell radius size and frequency reuse factor on system quality. Where
two tier co-channel interfering cells are effective. The up-link (reverse link) of cellular network and the dualslope
path loss propagation model are used for analysis network performance. The results are shown that for
higher frequencies and smaller cell radius, the two tier of co-channel interference cell become effective
comparison to frequencies of 1800 MHz. This leads to a reduce in the quality of the system as well as increasing
in reuse factor led to increase in the quality of system but this undesired for capacity.}
    }