@article{MAKHILLJEAS201611713769,
    title = {Micro Electro Discharge Machining of Non-Conductive Ceramic Using Conductive Powder Mix Dielectric Fluid},
    journal = {Journal of Engineering and Applied Sciences},
    volume = {11},
    number = {7},
    pages = {1469-1474},
    year = {2016},
    issn = {1816-949x},
    doi = {jeasci.2016.1469.1474},
    url = {https://makhillpublications.co/view-article.php?issn=1816-949x&doi=jeasci.2016.1469.1474},
    author = {Mohammad,Ali Nurhanim and},
    keywords = {Micro-EDM,Assisting Electrode Method (AEM),zirconia (ZrO2),Material Removal Rate (MRR),Titanium Carbide (TiC) powder},
    abstract = {This study presents the process development and investigation of the Material Removal Rate (MRR) in micro Electro Discharge Machining (micro-EDM) of non-conductive ceramic zirconia using titanium carbide powder mixed with the kerosene dielectric fluid. Experimental investigation is carried out using 1.0 mm diameter copper electrode with two varying parameters; gap voltage and capacitance. The MRR data are analyzed and an empirical model is developed using design expert software. The optimum parameters for maximum MRR are found to be 86 V gap voltage and 1.0 nF capacitance.}
    }